It takes imagination, determination, and maybe a little bit of craziness to modify an unconventional car to this level – but we’ve gotta say, this is one amazing Infiniti I30!
Engine/Trans -2002/03 Maxima 3.5 motor, no SS IM mod -K&N filter, velocity stack -2001/02 Pathfinder 70mm TB, custom adapter and throttle cable bracket from sicivic89 -NWP thermal intake manifold spacers -NWP Block off plate -Nistune ECU, 7k RPM rev-limit -Cattman headers -Resonated test pipe -2.5” Budget resonated b-pipe -2004 G35 sedan muffler -Aeromotive AFPR, Autometer […]
While most people may already know how to change their oil, there’s still some that may need help. Here’s detailed how-to that will help you with your oil change, and even if it’s a different vehicle than mine, the same basic principles still apply to changing the oil in your vehicle.
Applied Vehicle(s): Infiniti I30, 4th Gen. Maxima Difficulty Rating: Estimated Labor Time: 3 hours Written By: loystock Estimated Total Cost: $290.00 Find related tutorials and information on your vehicle in NICOclub’s Maxima Forum & I30 / I35 Forum Specification (and Pricing from IoS – infinitipartsUSA.com): -Front Rotor: 26mm new/24mm minimum; Maximum Runout=0.07mm ($82.11 from IoS) […]
Applied Vehicle(s): Vehicles w/ VQ35DE Engine Difficulty Rating: Estimated Labor Time: 2½ hours Written By: tollboothwilley Estimated Total Cost: $20.00 Find related tutorials and information on your vehicle in NICOclub’s Nissan Forums & Infiniti Forums So I have a (almost) new set of valve covers that I’m installing due to the leaking oil in cylinders […]
Applied Vehicles: VQ35DE Engine Difficulty Rating: Estimated Labor Time: 2½ hours Written By: IlyaKol Estimated Total Cost: $20.00 Find related tutorials and information on your vehicle in NICOclub’s M-Series Forum / Fuga Forum Figured I’d put this out there for anyone who was interested in changing their spark plugs on their own but wasn’t feeling […]
Special thanks for this write up goes to Fezzik (David Honey). Posted with permission from the author. This is the How To on the installation of heated mirrors. A few things first before I go on. I have the automatic climate control with the rear window defogger switch on it. The side view mirrors are […]
This How-To was performed on a 5th-Generation (2k2) Maxima. Installation should be similar to other Maxima generations as well. Special thanks for this write up goes to Fezzik (David Honey). Posted with permission from the author. This is going to be a simple How To for the H&R wheel spacer on the rear. When you […]
How To change Motor Mounts: Here are the tools it takes to complete the job: 1) floor jack 2) two 17mm short sockets 3) ~2.5′ of 1/2″ extensions 4) 1/2″ rachet 5) 18″ 1/2″ breaker bar 6) jack stands 7) 10mm socket and 1/4″ ratchet 8) “Bottle” jack 9) torque wrench 10) penetrating oil (preferably […]
I had a car in this morning with a P0325 (knock sensor), this example is a 97 Infiniti I30 since they are the easiest to show. 1:After confirming the code is present, get your multimeter and zero it out if you have the capability. 2:Disconnect the sensor 3:Connect your leads and view your results In […]