Fuel pump kill switch By:driftin8ez This mod is a good security feature as well as a helpfull diagnostic tool. If your car is having trouble starting you can use a fuel pump kill to see if it is getting to much fuel and flooding out. Also if hidden it makes a great anti-theft device. What […]
S-13 Digital Climate Control Swap
by gtrperformance Overview: The following is something that I posted on a different forum a few years back. I’m only posting it here to spread some love. I searched on here and I couldn’t find anything on the subject. Don’t ream me for it if it’s already on here. Here it goes: Please note that […]
Installing SPL Coilovers on S14
Applied Vehicle(s): Nissan 240SX Difficulty Rating: Estimated Labor Time: 4 hours Written By: Unknown Estimated Total Cost: $750.00 – $3000.00 Find related tutorials and information on your vehicle in NICOclub’s Nissan Forums & Infiniti Forums Overview: Coilovers allow the ultimate in adjustable suspension performance for your car, and they are easier to install than a […]
240sx Water Pump Replacement
by c-kwik Tools: – metric sockets and ratchet and open-end wrenches– drain pan Materials: – coolant Procedure: Begin by draining your coolant. Next remove your intake pipe and move the emissions lines out of the way. Take off the fan shroud so you can pull off the fan and clutch assembly together. Free the water […]
B&M Short Shifter Install
After driving around with the SR in, everything felt great except for the shifter.There was so much slop and play in it (in and out of gear), I finally had enough and decided to upgrade.Though there was slop, the old bushing was in perfect condition.There were no cracks or damage. Not having enough money for […]
Intake manifold mysteries revealed: DIY KA24DE emissions removal and assembly
1991-1994 Nissan 240sx N/A NICOclub Rating System NICOclub.com The following DIY will outline the parts you can remove (and the parts you can keep) on the S13 intake manifold when doing a KA-T build. Overview of the parts The intake manifold can be separated into an upper portion and a lower portion.Most of the emissions […]
240sx Convertible door pillar removal
Removal of the 240sx Convertible door pillars and converting the seat belts.
How to:Never overboost again!
By:nissanfanatic Ever had your wastegate line blow off?Wastegate fail?Ever just set something up wrong and blew an engine?Me either.But that sure as heck doesn’t mean I am gonna sit around and wait for it to happen! I have designed an overboost protector around a Hobbs pressure switch.What this system does is turns off the power […]
Turbo Tech: Make a Do-It-Yourself Turbo Overboost Protector
Contributed by nissanfanatic Ever had your wastegate line blow off?Wastegate fail?Ever just set something up wrong and blew an engine?Me either.But that sure as heck doesn’t mean I am gonna sit around and wait for it to happen! I have designed an overboost protector around a Hobbs pressure switch.What this system does is turns off […]
Installing an Injector Resistor Box
Contributed by Fiznat The following article details the procedure for installing a DSM injector resistor box into the S13 240sx chassis.These resistors must be installed whenever the stock high-impedence injectors are swapped out for (often larger) low-impedence models. Each injector has 2 wires on it, a red (power) wire and a different color (ground) wire.(The […]
- « Previous Page
- 1
- 2
- 3
- 4
- …
- 18
- Next Page »