This write up is for a 2000-01 VI manifold swap on to 95-99 Maxima. There are many ways to do this swap so first I will number the ways I know how to do this and then go into detail on how to do it. There are a couple of different Upper manifolds you can […]
5th-Generation Maxima – Install Chrome Gauge Rings
Special thanks for this write up goes to Fezzik (David Honey). Posted with permission from the author. This is a simple how-to on going from plain to chrome This works for all 5th and 5.5th gen Maximas This install is basically the same for the 5.0th gen and the 5.5th gen maximas. This install is […]
5th-Generation Maxima Front Speaker Removal
Special thanks for this write up goes to audtatious (Matt Moody). Posted with permission from the author. Use this image as a location reference to the steps below: Step 1: Use a flat head screwdriver and remove the plug at the bottom of the “grip” (what you use to close the door from the inside). […]
2002-2003 Nissan Maxima – Upgrade foglights to HID
The following directions can be utilized in converting the factory foglights to HID bulbs in the 2002-2003 Maxima. One person can accomplish this task with no problems. Please view pictures with steps for additional detailed information. NOTE: If you have purchased new lights that have “DEPOT” stamped across the glass instead of Nissan, please see […]
5th-Generation Maxima – Make a Ghetto Airbox
Hey guys. I was really interested in the Ghetto Air Box (GAB) but did not want to destroy the filter holder (>65 dollar value according to Dave B) So I thought up a way to create the same thing without cutting part of the holder off. This may have been thought up before but I […]
Installing a PCV Blow-by Oil Catch on a Nissan Maxima/Infiniti I30
Credit to Beancooker for the writeup. I TAKE NO RESPONSIBILITY IF YOU MESS UP YOUR CAR!!! PROCEED AT YOUR OWN RISK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! O.k. this is a really easy mod, it won’t give you horsepower, per se, but keeps you from burning any blow-by oil and dirtying your intake manifold. Also adding oil to gas lowers octane […]
LED Lighting Maxima Auto Gear Shifter
TOOLS NEEDED:Soldering ironRosen core6 White 3mm LEDS (preferred) or 5mm LEDS6 470 Ohms resistorsBreadboardDremel sand paperFlat head screwdriverHot glue gunHeat shrinkSnap or slide connectors First, remove the gear selector trim from the car. Remove the shifter trim, then remove the 4 screws holding the gear selector trim. Then remove the bulb socket. the gear trim […]
Custom Tint on Maxima tail lights
1. Remove tail lights by pulling back the trunk liner, after removing the retaining clips, and tail light housing nuts, on the inside of trunk. You may have to push your lenses out from inside the trunk with your hand because of the weather seal on the back side of it. If you get the […]
5th-Generation Maxima Injen Intake Installation
The following directions have been compiled to assist in the installation of an Injen intake onto a ’02-03 Maxima. The directions should also work with ’00-01 Maximas as well. Tools needed: 10mm socket + ratchet, ratchet extension, 10mm wrench, flat-head and phillips head screwdriver, Pliars ——————————————————————————– Parts: The injen intake should consist of the following […]
2002 Nissan Maxima:NICOclub Ride of the Month | Fezzik
2002 Nissan Maxima SE owned by David Honey (Fezzik) I acquired my maxima on ebay from a dealer who only sold chevy’s. The car only had 25000 miles on it. The car was a trade in from a lady who had twins and got a SUV. I could not pass up the deal […]
- « Previous Page
- 1
- 2
- 3
- 4
- 5
- …
- 7
- Next Page »