BY: PhanatikZ32 Composed by: 300ZXttZMAN Z32 COILOVER INSTALLATION Tools needed: – ½” ratchet – 3/8″ ratchet + 3/8″ extension – 10mm socket – 14mm socket *deep* – 17mm socket – 17mm wrench – Phillips screwdriver – BREAKER BAR!!! – Jack + Jack stands – PB Blaster or other rust penetrant spray NOTE: this installation is […]
5th-Gen Maxima Coilover Installation
Special thanks for this write up goes to Fezzik (David Honey). Posted with permission from the author. Here is what the rear coilover that I tested looked like compared to the stock rear suspension. These are still being tested and are not offered yet. You will first want to measure the car’s wheel gap right […]
Review: Megan Street Coilovers
By: rsmithdrift Ok so some of you know I got my Megan Streets in May of 08. My car has been through a lot since then.. Engine malfunctions, collisions with guard rails, being in and out of impound, and sitting for 9 months since then. If anything can test a set of coilovers its been […]