First, you have to determine if you have the gap needed for the lights. If you have the Stillen fascia, you’ll have the gap needed. Not sure on the stock so you’ll need to look and measure the distance. You’ll need about 1/4″ inches to fit the LEDs. Next, you’ll need 2 – 19″ white […]
Altima Instrument Gauge Lighting Change
First, I separated the the three pieces. They are easy to disassemble. Nothing but clips holding it together. Next, I separated the Bezel that has the notches for the speed, rpm, ect. I didn’t take off the needles because, I have had a bad experiences with that before. So, I peeled back the gauges and […]
Altima Coupe: Installing LEDs In The Center Vent And Cupholders
My philosophy with any automotive accent lighting is that the lights themselves shouldn’t be seen…only their soft glow. As such, I try to make sure that I mount my LEDs in places where they will reflect off many surfaces and give the nicest ambient light. Skill Level 3 of 5 Time Required 1-1 1/2hrs. Tools […]