The following directions can be utilized in the installation of an Addco RSB onto a 5th Generation (2000-2003) Maxima. Installation onto a 4th generation (1995-1999) should be similar. It is recommended that two people perform the installation, but, one person could accomplish the task. Please view pictures with steps for additional detailed information. Step 1. […]
4th-Gen Maxima Strut Boots Replacement
After doing some searching prior to doing my suspension install recently I found this information: “SB103 for the fronts and SB108 for the rears. Select the front boots for 95′ Mustang (SB103) and rear boots for 95′ Miata (SB108).” I thought that with all of the people looking to do suspension installs I would post […]
5th-Gen Maxima Coilover Installation
Special thanks for this write up goes to Fezzik (David Honey). Posted with permission from the author. Here is what the rear coilover that I tested looked like compared to the stock rear suspension. These are still being tested and are not offered yet. You will first want to measure the car’s wheel gap right […]
Project G37 Coilover Installation Part II
NICOclub’s Project G37 When we left off last time we had just installed an oil cooler on our project G37. However, we had mentioned the reason we chose to go with an oil cooler as our first modification was because of oil temperature problems at the track causing the ECU to lower the redline to […]
S13 FLCA Install
Due to some alignment issues and the need/want for more adjustability of camber in the front of my car, I chose to get the SPL adjustable Front Lower Control Arms (FLCA). There are a few options for Adj FLCAs on the market, but knew SPL has the highest of quality and just by looking at […]
240sx Tech: S13 Rear Ball Joint Replacement
Replace Rear Ball Joints in the Nissan 240sx S13.Just like the title says, this write up will walk you step by step through the process of replacing the rear lower ball joints on an s13 240sx. Difficulty: *** Time: 3-5 hours Cost: ~ $14 per ball joint online Materials: – b12 Sentra front ball joints […]
Review: Endura-Tech vs Megan Coilovers
By: AZhitman Spent Saturday morning installing a set of Endura-Tech coilovers on my S13 convertible… For the past 1200 miles, she’s been rolling on Megans. I’m not a suspension expert, so my impressions will be from a layperson’s point of view. I know what I like, and I know what “feels” right, but my limited […]